Hitachi HIDIC EH-150 Applications Manual page 43

5.4.3 Configuration of ASR I/O area
When using the connection for sending, it is required to specify the internal output area (I/O) in the CPU
module as the source area. And when using the connection for receiving, it is required to specify the internal
output area in the CPU module as the destination area. The configuration procedure for these usage are
described here.
(1) Displaying of "ASR I/O area display window"
Firstly, click the "I/O area (1)-(6) link selection" of menu window then the operation frame changes to the
"ASR I/O area display window". The current configuration is displayed onto this window.
Chapter 5 Configuration and procedure for starting communication
Figure 5.4.3.1 ASR I/O area display window
5-24