Hitachi HIDIC EH-150 Applications Manual page 79
Programable controller; ethernet module(eh-eth)
Hide thumbs
Also See for HIDIC EH-150:
- Applications manual (117 pages) ,
- Instruction manual (29 pages) ,
- Applications manual (20 pages)
Table of Contents
Advertisement
Bit 1: Send timeout error bit (STE[6:1])
These bit the timeout condition during sending data.
Bit1: STE[6:1]
0
No timeout error is detected during sending data.
1
A timeout error is detected during sending data.
Method to clear: To clear these bits to "0", please set "1" to TEC[6:1] of EC1CR.
Bit 0: Open error bit (OE[6:1])
These bits show the condition during opening connection.
Bit0: OE[6:1]
0
No error is detected during opening connection.
1
An error is detected during opening connection.
Method to clear: To clear these bits to "0", please set "1" to OEC[6:1] of EC1CR.
Description
Description
8-4
Chapter 8 Register Structure
Advertisement
Table of Contents
