Hitachi HIDIC EH-150 Applications Manual page 30

Table 5.2.7.1 The list of items of Task code operation frame
No Name
Task code port information
1) Task code port
timeout
2) Timeout value
Task code port [1:4]
3-1) Protocol
4-1) Port No.
When you click the "Set" button on the frame, EH-ETH will check the parameters. If all parameters are
correct, they will be saved into set up file, and the "Task code setting window" will appear. If they are wrong,
set up file is not updated. In this case, please check and correct the value, and set again.
To cancel the input value, please click the "Return" button of Web browser. The frame will return to the "Task
code display frame".
Chapter 5 Configuration and procedure for starting communication
To set the timeout of Task code connection is enable or not. This value is
valid for all Task code connections. If this is specified as disable, the
value of item (2) is not valid.
To set the value for timeout of Task code connection and this unit is
second. This value is valid for all Task code connections.
To select the protocol for Task code connection.
To set the logical port number for Task code connection.
5-11
Description Range for setting
Enable, Disable
Between 0 and 65535
TCP/IP, UDP/IP
Between 1 and 65535