4.4 Replacement From H-200/250/252B/252C; Replacement With Normal Remote Method - Hitachi HIDIC EH150 EN-TRMME Applications Manual

Compact remote module
Table of Contents

Advertisement

Chapter 4
Basic functions and System configuration

4.4 Replacement from H-200/250/252B/252C

This remote module has communication-compatibility with remote I/O for H-200/250/252B/252C, you can use an
existing cable in replacement. But there are differences with lineup of I/O modules, specifications, dimensions, I/O
assignment, and support of commands, please consider these differences in replacement.
And you must set compression mode according to usage of image slots in H-200/250/252B/252C.
It explains around the content concerning the replacement of a remote system as follows.
4.4.1

Replacement with normal remote method

Figure 4.15 shows the system configuration example of the H-200 series using no image slot. Figure 4.16 shows
I/O assignment for remote bases of this system. Figure 4.17 shows the replaced system configuration example of
the EH-150 series. In this case, it is necessary to change I/O assignment for master module from "Remote" to
"Remote 2".
Figure 4.17 is an example of replacing all of master and slave modules with the EH-150 series. It is also possible
to leave all or partially slave modules like the H-200 series in order to postpone the wiring work of slaves. In this
case, please turn off high-speed refreshing mode (HS) of a front DIP switch of the master module and the slave
modules.
Master module (RIOH-TM):
Maximum 4 module
mountable on slot 0-9.
Occupied channels of master No.1
Channel
Input
Output
No.
0
X10000~
1
X10100~
2
Y10200~
3
Y11000~
4
Y11100~
5
X11200~
6
X11300~
7
Y11400~
Figure 4.15 System configuration example-3 of the H-200 series (Not using image slot)
Setting of slave St. No.0
U
0
3
L
Occupied channels of slave St.No.0
Channel
Input
No.
0
X10000~
1
X10100~
2
0
First CH:
Number of
occupied
3
channels:
Slave module
(RIOH-TL)
X
X
Y
16
16
16
Output
Y10200~
4 – 10
Setting of slave St. No.1
3
3
U
First CH:
Number of
5
occupied
L
5
channels:
Slave module
(RIOH-TL)
Y
Y
X
X
16
16
16
16
Occupied channels of slave St.No.1
Channel
Input
Output
No.
3
Y11000~
4
Y11100~
5
X11200~
6
X11300~
7
Y11400~
Y
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hidic eh150en-trmle

Table of Contents