Downloading And Uploading Of Setup File - Hitachi HIDIC EH-150 Applications Manual

5.4.4

Downloading and Uploading of Setup file

EH-ETH memories Web browser information as setup file (file name: setup.dat).
A user can download to host computer (PC or WS) via Web browser. A user can also upload a stored
setup.data file to EH-ETH from host computer. You do not need to change a operation mode(dip switch
setting) when you upload or download setupdat. Therefore you can save a time to set each item when you
change IP address or EH-ETH itself.
You do not need to change dip switch to operate setup.dat file, you can change the setting of EH-ETH easily.
This is User-friendliness good and all users who can access setup page can change the setting of EH-ETH.
Therefore the control and operation of network equipment may have trouble by the change.
The download page of setup.dat file have pass word function for security. By this function, setting
information can be protected from the access by except network administer
Caution
- This pass word function is added from SOFTWARE VER.02.
This function is not available at SOFTWARE VER.00. But at SOFTWARE VER.02 , user name is "User" and pass
word is "Password". So substantially without notice access is unable to be avoided.
The below explanation is to access to setup page. Besides, part of operation procedure is depend on each
SOFTWARE VERSION. The explanation of (2) or later is not applied for SOFTWARE VER.00.
LOGIN to setup page at normal operation mode.
(1). Click Setup file link in menu frame.
(2). "Network pass word input" is displayed.
(3). User name and pass word is different from each SOFTWARE VER.
[SOFTWARE Ver.02]
(3-1). Input "User" in usr name box, and "Password" in pass word box. First character of both "User" and
"Password" is capital character.
[SOFTWARE Ver.03 or later]
(3-1). When you access setup page at first, input "User" in usr name box and brank in password box and click
OK button. First character of "User" is capital character.
(3-2). When you already registered "user name" and "password", after input registered characters and click
OK button.
The login to an setup page completes with over.
Chapter 5 Configuration and procedure for starting communication
5-27