Connection With Ladder Editor For Windows; Ip Address Setting - Hitachi EH-150 Applications Manual

6.3 Connection with LADDER EDITOR for Windows®
You can program CPU module via EH-ETH2 with LADDER EDITOR for Windows®.
This chapter explains at the setting of EH-ETH2 and PC shown in Table 6.4. The setting of EH-ETH2 is
default value. IP address of PC should be set at your network environment.
There is a IP address setting and a host name setting in the method of specifying the connecting station.
6.3.1

IP address setting

To input IP address directly, OS of a personal computer that is newer than Windows®98SE is needed.
Please set it by inputting the host name of chapter 6.3.2, if you use older OS.
- Setting of LADDER EDITOR for Windows®
(1) Open LADDER EDITOR for Windows® and go off-line mode.
(2) Choose [Environment Set] in [Utility] menu in the offline mode.
(3) Choose [Communication]dialog box.
A) Communication type
B) Host name
C) Port number
After setting, click [OK] button.
A)
(4)Choose [GRS] in [File] menu.
All setting are completed with this process.
After this, LADDER EDITOR for Windows® can communicate via EH-ETH2 in [Online] or [on-direct]
Table 6.4
Setting Item EH-ETH2
IP address 192.168.0.1
Subnet mask 255.255.255.0
Port number 3004
: Ethernet
: 192.168.0.1 (IP address of EH-ETH2 )
: 3004
6-6
Chapter 6 Task code communication
Setting
PC
192.168.0.128
255.255.255.0
-
B)
C)