Hitachi HIDIC EH-150 Applications Manual page 55

- Setting of LADDER EDITOR for Windows®
(1). Open LADDER EDITOR for Windows® and go off-line mode.
(2). Choose [Environment Set] in [Utility] menu in the offline mode.
(3). Choose [Communication]dialog box.
A). Communication type
B). Host name
C). Port number
After setting, click [OK] button.
A).
(4).Choose [GRS] in [File] menu.
All setting are completed with this process.
After this, LADDER EDITOR for Windows® can communicate via EH-ETH in [Online] or [on-direct]
Caution
After setting Ethernet connection, it takes about 45 seconds to display "Communication Error" message in
the following cases. This time period is due to Windows95, 98 internal processing.
(1). To try to go [online] or [on-direct] when the setting of EH-ETH is not correct, or to try to go [online] or
[on-direct] when the setting of PC or LADDER EDITOR for Windows® is not correct,.
(2). To try to go [online] or [on-direct] to EH-ETH without the power.
(3). Power off EH-ETH during communication.
(4). To Change I/O assignment during communication.
(5). EH-ETH breaks down during communication.
(6). To disconnect 10BASE-T cable during communication or breaking wire.
: Ethernet
: EH-CPU448C (Name in Hosts file )
: 3004
6-6
Chapter 6 Task code communication
B).
C).