Hitachi HIDIC EH-150 Applications Manual page 40

Chapter 5 Configuration and procedure for starting communication
When you click the "Set" button on the frame, EH-ETH will check the parameters. If all parameters are
correct, they will be saved into set up file, and the "ASR Information display window" will appear. If they are
wrong, set up file is not updated. In this case, please check and correct the value, and set again.
5.4.2 The configuration of ASR connection
The procedure of setting for ASR connection
(1) Displaying of "ASR connection display window"
Firstly, click the "Connection (1)-(6)" in the menu window. The "ASR connection display window" will
appear. The current configuration is displayed onto this window. This window is shown in figure 5.4.2.1.
Figure 5.4.2.1 ASR connection display window
5-21