Siemens SINUMERIK 802D sl Programming Manual page 233

04.07
22900
MD number
Default setting: 0
Changes effective after POWER ON
Data type: BYTE
Meaning:
This MD cannot SINUMERIK 802D sl.
22910
MD number
Default setting: 0
Changes effective after POWER ON
Data type: BOOLEAN
Meaning:
22914
MD number
Default setting: 0
Changes effective after POWER ON
Datentype: BOOLEAN
Meaning:
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
STROKE_CHECK_INSIDE
Determine enternal/external protection zone
Minimum input limit: 0
Protection level: 2/7
This machine data applies in combination with external programming languages.
It is effective with $MN_MM_EXTERN_LANGUAGE = 1.
It defines whether protection zone 3 is an internal or external protection zone.
Meaning:
0: Protection zone 3 is an internal protection zone
1: Protection zone 3 is an external protection zone
WEIGHTING_FACTOR_FOR_SCALE
Input unit for scaling factor
Minimum input limit: 0
Protection level: 2/7
This machine data applies in combination with external programming languages. It is active
with $MN_MM_EXTERN_LANGUAGE = 1.
It defines the unit for the scale factor P and the axial scale factors I, J, K
Meaning:
0: Scale factor in 0.001
1: Scale factor in 0.00001
AXES_SCALE_ENABLE
Enable axial scaling (G51)
Minimum input limit: 0
Protection level: 2/7
This MD enables axial scaling.
Meaning:
0: Axial scaling not possible
1: Axial scaling possible, (MD DEFAULT_SCALE_FACTOR_AXIS becomes effective)
Machine and Setting Data
D.2 Channel-specific machine data
Maximum input limit: 1
Unit: - -
Applies with effect from SW version: 5.2
Maximum input limit: 1
Unit: - -
Applies with effect from SW version: 5.2
Maximum input limit: 1
Unit: - -
gültig ab SW- -Stand: 5.2
D-233