Siemens SINUMERIK 802D sl Programming Manual page 120

Enhanced Level Commands
4.1 Program support functions (1)
Tool offset
Tool offsets are ignored in the canned cycle mode.
Example
Z axis feedrate 1000 mm/min
Spindle speed 1000 rpm
Thread lead 1.0 mm
<Programming of feed per minute>
S1000 M3;
G94;
G00 X100.0 Y100.0;
G84 Z--50.0 R--10.0 F1000;
<Programming of feed per revolution>
G95;
G00 X100.0 Y100.0;
G84 Z--50.0 R--10.0 F1.0;
4-120
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
Feed--per--minute
Positioning
Rigid tapping
Feed--per--revolution
Positioning
Rigid tapping
© Siemens AG 2007 All rights reserved
04.07