Siemens SINUMERIK 802D sl Programming Manual page 129

04.07
Offset value +200.0 is set in offset No.11, +190.0 is set in offset No.15, and +150.0
is set in offset No.30
Program example
;
N001 G49
N002 G10 L10 P11 R200.
N003 G10 L10 P15 R190.
N004 G10 L10 P30 R150.
N005 G92 X0 Y0 Z0
N006 G90 G00 Z250.0 T11 M6
N007 G43 Z0 H11;
N008 S30 M3
N009 g99 G81 X400.0 Y-350.0
Z-153.0 R-97.0 F1200;
N010 Y-550.0
N011 G98 Y-750.0
N012 G99 X1200.0
N013 Y-550.0
N014 G98 Y-350.0
N015 G00 X0 Y0 M5
N016 G49 Z250.0 T15 M6
N017 G43 Z0 H15
N018 S20 M3
N019 G99 G82 X550.0 Y-450.0
Z-130.0 R-97.0 P300 F700
N020 G98 Y-650.0
N021 G99 X1050.0
N022 G98 Y-450.0
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
Enhanced Level Commands
4.1 Program support functions (1)
; Tool length offset cancel
; Set tool offset 11 to +200.
; Set tool offset 15 to +190.
; Set tool offset 30 to +150.
;
Coordinate setting at reference
;
position
; Tool change
; Initial level, tool length offset
; Spindle start
; Positioning, then #1 drilling
;
Positioning, then #2 drilling and
;
point R level return
;
Positioning, then #3 drilling and
;
initial level return
;
Positioning, then #4 drilling and
;
point R level return
;
Positioning, then #5 drilling and
;
point R level return
;
Positioning, then #6 drilling and
;
initial level return
;
Reference position return,
;
spindle stop
;
Tool length offset cancel, tool
;
change
; Initial level, tool length offset
; Spindle start
;
Positioning, then #7 drilling,
;
point R level return
;
Positioning, then #8 drilling,
;
initial level return
;
Positioning, then #9 drilling,
;
point R level return
;
Positioning, then #10 drilling,
;
initial level return
4-129