Siemens SINUMERIK 802D sl Programming Manual page 117

04.07
Cancel
G codes of group 01 (G00 to G03) and G89 must not be specified in a single block.
Otherwise, G89 is canceled.
Tool offset
Tool offsets are ignored in the canned cycle mode.
Example
M3 S150;
G90 G0 Z100
G90 G99 G89 X200. Y--150. Z--100. R50. P1000 F150.;
Y--500.;
Y--700.;
X950.;
Y--500.;
G98 Y--700.;
G80;
G28 G91 X0 Y0 Z0; Return to the reference position return
M5;
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) -- 04.07 Edition
Rotate spindle
Position, drill hole 1, return to point R
then stop at the bottom of the hole for 1 s.
Position, drill hole 2, and return to point R.
Position, drill hole 3, and return to point R.
Position, drill hole 4, and return to point R.
Position, drill hole 5, and return to point R.
Position, drill hole 6, and return to the initial level.
Cancel canned cycle
Spindle stop
Enhanced Level Commands
4.1 Program support functions (1)
4-117