Chapter 2. Hardware Interface; Physical Descriptions; Identification Of Ica-E6265 Rear Panel And Connectors - Planet Networking & Communication ICA-E6265 User Manual

2 Mega-pixel IR PoE Plus Speed Dome IP Camera
ICA-E6265
Chapter 2. Hardware Interface

2.1 Physical Descriptions

2.1.1 Identification of ICA-E6265 Rear Panel and Connectors

Micro SD Card Slot
Reset Button
Power LED
1. Memory Card Slot: Supports microSDHC cards.
Insert a memory card (not included) into this slot for local recording purposes.
2. Reset Button: Use the Reset Button to restore the camera to factory default settings. To do the
reset, press and hold the Reset button for at least 5 seconds or until the Power LED lights off. The
camera will reboot and restore to factory default settings.
3. Power LED
The Power LED lights up when the camera is connected to the power source.
16