Planet Networking & Communication ICA-M4320P User Manual

H.265 3 mega-pixel ir io camera with remote focus and zoom
Table of Contents

Advertisement

Quick Links

H.265 3 Mega-pixel IR IP
Camera with Remote Focus
and Zoom
ICA-M4320P

Advertisement

Table of Contents
loading

Summary of Contents for Planet Networking & Communication ICA-M4320P

  • Page 1 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P...
  • Page 2 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Copyright Copyright  2016 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
  • Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual of PLANET H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom Model: ICA-M4320P Rev: 1.00 (July, 2016) Part No. EM-ICA-M4320P_v1.0...
  • Page 4: Table Of Contents

    1.4 Product Specifications ................12 Chapter 2. Hardware Interface ................14 2.1 Physical Descriptions ................14 2.1.1 Identification of ICA-M4320P Physical Details ....14 2.1.2 Inside View ................15 2.2 Hardware Installation ................18 2.3 Initial Utility Installation ................20 2.4 Preparation ....................
  • Page 5 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.5.6 Streaming................... 50 3.5.7 UPnP ..................51 3.5.8 Bonjour ..................52 3.5.9 IP Filter ..................53 3.5.10 Notification ................. 54 3.5.11 CoS ..................... 55 3.5.12 QoS ..................... 56 3.5.13...
  • Page 6 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.15.2 SAMBA Server ................87 3.15.3 iSCSI ..................87 3.16 Continuous Recording Configuration ..........88 3.17 Recording List Configuration ............89 3.17.1 Recording List ................89 3.17.2 Continuous Recording List ............90 3.18...
  • Page 7: Chapter 1. Product Introduction

    1.2 Overview Suitable for Monitoring All Indoor Areas PLANET ICA-M4320P PoE IP Camera delivers excellent picture quality in H.265 3 mega-pixel resolutions at 30 frames per second (fps). Users will benefit from reduced 50% bandwidth and data storage through more efficient video compression.
  • Page 8 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Moreover, the built-in PIR motion detection sensor in the ICA-M4320P is helpful to enhance the security level. It is perfect for remote and discreet monitoring of indoor areas such as stores, banks, hotels, office lobbies and warehouses.
  • Page 9 When people pass by or in an emergency situation, the built-in PIR motion detection sensor in the ICA-M4320P will “detect” and start recording automatically. It is able to detect movement as far as 6 meters away. When a motion is detected in a specified area, the administrator will...
  • Page 10 ICA-M4320P, adopting the IEEE 802.3af standard, does not need extra power cables and manpower, thus reducing installation costs while increasing deployment flexibility and scalability. The ICA-M4320P is ONVIF compliant and interoperable with other brands in the market. The ICA-M4320P is indisputably the ideal choice for reliable and high-performance surveillance.
  • Page 11: Features

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 1.3 Features  Camera  1/2.8" Sony Exmor progressive scan CMOS sensor  2.8~12 mm vari-focal, P-Iris lens  Smart Focus for remote and precise focus adjustment ...
  • Page 12: Product Specifications

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 1.4 Product Specifications Model ICA-M4320P Camera Image Device 1/2.8" 3 mega-pixel Sony Exmor progressive scan CMOS sensor Vari-focal 2.8~12mm, P-Iris Optical Zoom: 4x Lens Angle of view: Horizontal: 29 ~ 94 degrees Vertical: 23 ~ 72 degrees 0.01 lux (color) @ F1.2...
  • Page 13 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Network and Configuration IEEE 802.3 10BASE-T Standard IEEE 802.3u 100BASE-TX IEEE 802.3af Power over Ethernet IPv4, IPv6, TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, Protocol PLANET DDNS, DHCP, Bonjour, UPnP, RTSP, RTP, RTCP, PPPoE, Samba, SNMP, QoS, IEEE 802.1x...
  • Page 14: Chapter 2. Hardware Interface

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Chapter 2. Hardware Interface 2.1 Physical Descriptions 2.1.1 Identification of ICA-M4320P Physical Details Item Description Lens Keep the lens clean for an excellent video quality. IR LED Emits infrared light to provide light source in dark places Detects the illumination level or the place where this IP camera is installed, and switches IR LEDs on when it’s required.
  • Page 15: Inside View

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.1.2 Inside View Description of I/O Cabling: Interface Description  Connecting to PC or Hub/ PoE Switch Connects the onboard LAN port to your local area network over Ethernet cable.
  • Page 16 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P The input power is 12V DC, 1A. DC 12V Connector (The power adapter is not included in the package.) This button supports two functions: “Restore to factory default setting”...
  • Page 17 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Terminal Block for I/O Connectors: Name Function MIC - External microphone input- MIC + External microphone input+ A/out + Audio signal output A/out - Analog signal ground Video out...
  • Page 18: Hardware Installation

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P provided) may have to be used. Serious damage to the network camera may result if a device is connected to the external I/O that exceeds its electrical capability.
  • Page 19 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 4. Check the LED indication: As the camera adopts the IEEE 802.3af standard, its Ethernet cable can be connected to a PoE switch to obtain power. Once IP camera is properly installed and powered on, the power LED will be lit in orange, meaning the system is booting up successfully.
  • Page 20: Initial Utility Installation

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.3 Initial Utility Installation This chapter shows how to quickly set up your IP camera. The camera is with the default settings. However to help you find the network camera quickly, the windows utility PLANET IP Wizard II can search the cameras in the network that can help you to configure some basic settings before you start advanced management and monitoring.
  • Page 21 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 4. Please click “Next” to install with original settings, or you may click the “Browse…” button to modify the install folder and then press “Next” to continue. 5. Please click “Install” to start the installation.
  • Page 22 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Please click “Finish” to complete the installation and launch program immediately.
  • Page 23: Preparation

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.4 Preparation When you install the Internet camera in a LAN environment, you may execute PLANET IP Wizard II to discover camera’s IP address and set up related parameters in the camera.
  • Page 24 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P When launching the Planet IP Wizard II, the “searching” window will pop up. Planet IP Wizard II is starting to search Internet cameras on the LAN. The existing devices are listed below.
  • Page 25: Configuring Network By Planet Ip Wizard Ii

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.4.2 Configuring Network by PLANET IP Wizard II In case you want to change the IP related parameters of wired interface, please select the Internet camera you want to configure and click the LAN button. Related settings will be carried out as shown below.
  • Page 26 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P If you like to change password of the device, just click the check button. Then, the related fields will show up as shown below. After keying in the new password, click the “Submit” button to perform your setting accordingly.
  • Page 27: Using Upnp Of Windows Xp Or 7

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.5 Using UPnP of Windows XP or 7 2.5.1 Windows XP UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. This device is an UPnP enabled device.
  • Page 28 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P The “Add or Remove Programs” will be displayed on the screen and click Add/Remove Windows Components to continue. The following screen will appear; select “Networking Services” and click “Details” to...
  • Page 29 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P The “Networking Services” will be displayed on the screen; select “Universal Plug and Play” and click “OK” to continue. Please click “Next” to continue.
  • Page 30 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P The program will start installing the UPnP automatically. You will see the pop-up screen below. Please wait while Setup configures the components. Please click “Finish” to complete the UPnP installation.
  • Page 31: Windows 7

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Double-click “My Network Places” on the desktop, and the “My Network Places” will be displayed on the screen and double-click the UPnP icon with Internet Camera to view your device in an Internet browser.
  • Page 32 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P...
  • Page 33: Activex Setup To Use The Internet Camera

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.6 ActiveX Setup to use the Internet Camera The Internet Camera web pages communicate with the Internet camera using an ActiveX control. The ActiveX control must be downloaded from the Internet camera and installed on your PC.
  • Page 34: Internet Explorer 7 For Windows Xp

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 2.6.2 Internet Explorer 7 for Windows XP From your IE browser  ”Tools”  ”Internet Options…”  ”Security” ”Custom Level…”, please set up your “Settings” as follows: Set the first 3 items •...
  • Page 35 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P From your IE browser  “Tools”  “Internet Options…”  “Security” ”Custom Level…”, please set up your “Settings” as follows: • Enable “Automatic prompting for ActiveX controls” • Prompt “Initialize and script active controls not marked….”...
  • Page 36: Chapter 3. Web-Based Management

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Chapter 3. Web-based Management This chapter provides setup details of the Internet camera’s Web-based Interface. 3.1 Introduction The Internet camera can be configured with your Web browser. Before configuring, please make sure your PC is under the same IP segment with Internet camera.
  • Page 37 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P After logging in, you will see the following message at the top of Internet Explorer: If user using IE browser 11, the message might not show. Please click the Tools button...
  • Page 38 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Click the Add button to add camera webpage as a compatible website.
  • Page 39 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P After a successful addition, camera’s IP address should be set as compatible view website. Click on the message, and click Run Add-on...
  • Page 40 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P When you see this message, click Run to install the required ActiveX control. After the ActiveX control has been installed and run, the first image will be displayed.
  • Page 41: Live View

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.3 Live View Start-up screen will be as follows whether you are an ordinary user or an administrator. Video Profile ActiveX Control Streaming Protocol Language Image Monitoring Section...
  • Page 42: Activex Control

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P left mouse button. Note that this feature only supports the ActiveX control within Microsoft® Internet Explorer. Setting Menu This function is in a detailed setting for the camera that is only available for user logged into camera as administrator.
  • Page 43: Digital Zoom

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.4.1 Digital Zoom Click Digital Zoom to activate this function shown below. User can drag or scale the box over the video to adjust zoom ratio and position.
  • Page 44: Record

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.4.3 Record Click Record to activate this function. Press the Record button to start recording. The video file is saved as ASF format onto your local PC. If you want to stop it, press Stop to stop recording.
  • Page 45: About

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.4.5 About Click “About” to show the ActiveX information 3.5 Network Configuration Use this menu to configure the network to connect the device and the clients. 3.5.1 Network This section provides the menu of connecting the device through Ethernet cable.
  • Page 46 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P address for 192.168.0.20. If you do not select “Obtain an IP address automatically”, then you need to enter these network parameters by yourself. This address is a unique numbers that identifies a computer or IP Address device on the WAN or LAN.
  • Page 47: Ipv6

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P http://192.168.0.20:8080. Therefore, the user can access the device by either http://xx.xx.xx.xx/, or http://xx.xx.xx.xx:xxxx/ to access the device. If multiple devices are installed on the LAN and also required to be accessed from the WAN, then the HTTP Port can be assigned as the virtual server port mapping to support multiple devices.
  • Page 48: Ddns Server

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P adequate cipher suites are used and that the server certificate is verified and trusted. To enable or disable the HTTPS service here. Note that the HTTPS function of this device not only encrypts the web content but also HTTPS audio/video data.
  • Page 49: Pppoe

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P use is www.planetddns.com. You’ll need to register with the service and set up the domain name of your choice to begin using it. Please refer to the home page of the service for detailed instructions.
  • Page 50: Streaming

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P It can directly connect to the xDSL; however, it should be set up in a LAN environment to program the PPPoE information first, and then connect to the xDSL modem. Power it on again to enable device dial on to the ISP for connecting to the WAN through the xDSL modem.
  • Page 51: Upnp

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Choose the RTSP port. The RTSP protocol allows a connecting client to RTSP Port start a video stream. Enter the RTSP port number to use. The default value is 554.
  • Page 52: Bonjour

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router will be forwarded to the device.
  • Page 53: Ip Filter

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P To enable or disable the Bonjour service here. Bonjour Friendly Name Shows the friendly name of this device here. 3.5.9 IP Filter You can enter different user’s IP addresses by entering allow or deny.
  • Page 54: Notification

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.5.10 Notification In case the IP address is changed, system is able to send out an email to alert someone if the function is enabled. If this function is enabled, the “Send to” and “Subject” fields SMTP Notification (e-mail) need to be filled out.
  • Page 55: Cos

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P If this function is enabled, the fields below need to be filled HTTP Notification out. Type the server name or the IP address of the HTTP server HTTP Login Name Type the user name for the HTTP server.
  • Page 56: Qos

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Enter the ID of the VLAN to which CoS packets are directed. VLAN ID Value from 0 (lowest priority) through 7 (highest priority) that Live Video specifies the CoS priority value for steaming video data.
  • Page 57 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P The standardized DiffServ field of the packet is marked with a value so that the packet receives a particular forwarding treatment or PHB, at each network node. The default DSCP is 000 000.
  • Page 58: Ieee 802.1X

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.5.13 IEEE 802.1X IEEE 802.1X is an IEEE Standard for port-based Network Access Control. It is part of the IEEE 802.1 group of networking protocols. It provides an authentication mechanism for devices to connect to a LAN, either establishing a connection or preventing the connection if authentication fails.
  • Page 59: Picture

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.6.1 Picture Turn the “Mirror” and “Vertical Flip” on or off. The image will be overturned as shown below. Rotation The function allows you to get a vertically oriented video stream from the...
  • Page 60 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Auto: will adjust the white balance automatically. White Balance Hold: will hold the white balance. Color Level Large value will be colorful. Change the value by color tuning.
  • Page 61 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Night Mode Threshold (0~10000): This value sets the threshold to turn on IR LED. It should be lower or equal to Day Mode Threshold. Day Mode Threshold (0~10000): This value sets the threshold to turn off IR LED.
  • Page 62: Exposure Control

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.6.2 Exposure Control Power Frequency Frequency of power line: 50 or 60Hz. Auto: It will adjust the image sensor exposure automatically as possible. Exposure Control Hold: The current exposure value will be fixed.
  • Page 63: Privacy Mask

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.6.3 Privacy Mask Use this page to specify privacy mask window 1 to window 7 and set the name and gray level for selected window. To add or delete the privacy mask windows, user can specify up to 7 windows to mask the video captured by this device.
  • Page 64: Focus

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.7 Focus Use this menu to set the focus of camera. Lock AF If the function is enabled, the current focus of camera is fixed. Auto Focus Click this button to activate push AF.
  • Page 65: System Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.8 System Configuration Use this menu to perform the principal settings of Internet Camera. 3.8.1 System You can enter the name of this unit here. It’s very useful to identify the Device Title specific device from multiple units.
  • Page 66: Date & Time

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.8.2 Date & Time User can set up the time setting of Internet camera. Synchronize it with PC or remote NTP server. Also, you may select the correct time zone of your country.
  • Page 67: Maintenance

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Select an interval between 1 and 23 hours at which you want to NTP Sync. Interval adjust the device’s time referring to NTP server. Set the time difference from Greenwich Mean Time in the area Time Zone where the device is installed.
  • Page 68 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Recall the device hard factory default settings. Note Default Settings (Including the that clicking this button will reset all devices’ network setting) parameters to the factory settings (including the IP address).
  • Page 69: Video Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P completed, the device will reboot the system automatically. 9. Please wait for 80 seconds, and then you can use PLANET IPWizard II to search the device again. Warning!!! The downloading firmware procedure cannot be interrupted.
  • Page 70: Overlay Image

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P There are some important information that can be embedded into Text Overlay Setting image, including date, time, and/or text. 3.9.2 Overlay Image User can upload bitmap file to the camera and overlay the picture on streaming video and set its attributes.
  • Page 71: Video Profile

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Lower value will lower transparency. Value 0 means opacity. Transparency 3.9.3 Video Profile User can modify the detailed parameter for each video profile on this page. To assign a name to the selected profile.
  • Page 72 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P higher value can reach the better quality but of course will consume higher bandwidth. For EVBR, the video bitrate is based on normal VBR mode. However, the bitrate can be limited to the max. Bitrate while there are lots of motions in video.
  • Page 73: Onvif Profile

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.9.4 ONVIF Profile ONVIF protocol defines profile of video streams. In case, the NVR, CMS and/or VMS are/is connected to this device via ONVIF protocol, use this page to define parameters of video streams.
  • Page 74 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then the video stream will have one Intra-frame GOP Control every 30 frames.
  • Page 75: Roi

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.9.5 ROI ROI means Region of Interest. Use this page to specify location and size of ROI windows. Only the maximum resolution profiles can be defined as ROI. In this model, user can define a maximum of three ROI windows.
  • Page 76: Aoi

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.9.6 AOI AOI means Area of Interest. Use this page to specify location and size of AOI windows. Only the profiles with H.264 codec and VBR rate control can support AOI function. It enables a non-uniform distribution of the image quality between a selected region (the AOI) and the rest of the image (background).
  • Page 77: Pixel Counter

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.9.7 Pixel Counter The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a requirement that the image is a certain size, for example, in face recognition.
  • Page 78: Alarm Voice

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Audio To enable or disable audio function. Audio Type To select G711 or G726 for audio coding. Audio Mode To select Simplex or Full duplex (2-way audio) mode.
  • Page 79: User Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.11 User Configuration Use this menu to set the user name and password of the Administrator and up to 10 users, and access right of each user. Select “Anonymous” to allow any one viewing the video once Viewer Login connected.
  • Page 80: Protocol Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.12 Protocol Configuration 3.12.1 ONVIF ONVIF is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products. In other words, it creates a standard for how IP products within video surveillance and other physical security areas can communicate with each other.
  • Page 81: E-Mail Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P operates over protocols such as User Datagram Protocol (UDP), Internet Protocol (IP), OSI Connectionless Network Service (CLNS), AppleTalk Datagram-Delivery Protocol (DDP), and Novell Internet Packet Exchange (IPX). SNMPv1 is widely used and is the de facto network-management protocol in the Internet community SNMPv2c is defined in RFC 1901–RFC 1908.
  • Page 82: Event Detection Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Enable SSL function or not. Select the authentication required when you send an e-mail. SMTP Authentication Disable: If no authentication is required when an e-mail is sent. Enable: If authentication is required when an e-mail is sent.
  • Page 83: Motion Detection

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.14.1 Motion Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image. To add or delete the motion windows. User can specify up to 4...
  • Page 84: Camera Tampering

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Define the sensitivity value of motion detection. The higher value will Sensitivity be more sensitivity. 3.14.2 Camera Tampering Camera tampering detection is a new intelligent functionality that further strengthens the benefit of Network Camera.
  • Page 85: Audio Detection

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.14.3 Audio Detection Audio detection alarm can be used as a complement to motion detection. Since audio detection can react to events in areas too dark for the video motion detection functionality to work properly.
  • Page 86: Sd Card

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.15.1 SD Card Disk ID This name of SD card This information of SD card Status Enable Automatic Delete old recorded files while the conditions are reached as below.
  • Page 87: Samba Server

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.15.2 SAMBA Server Host Type the server name or the IP address of the SAMBA server. Share Set working directory path of SAMBA server. User Name Type the user name for the SAMBA server Type the password for the SAMBA server.
  • Page 88: Continuous Recording Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P iSCSI status and login/logout action Status/Target 3.16 Continuous Recording Configuration You may enable or disable continuous recording function here. Select SD card, Samba server or iSCSI for storage destination.
  • Page 89: Recording List Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.17 Recording List Configuration 3.17.1 Recording List This page only shows the event recording files which are stored on SD card. User may play or delete the selected file.
  • Page 90: Continuous Recording List

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.17.2 Continuous Recording List This page shows the continuous recording files which are stored on SD card, Samba server or iSCSI. User may play or delete the selected file.
  • Page 91: Event Server Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.18 Event Server Configuration 3.18.1 FTP Server You may set up FTP parameters for further operation of Event Schedule. If users want to send an alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP.
  • Page 92: Tcp Server

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Normal: Set it as normal if the FTP server is unencrypted FTP that defaults over port 21. Protocol FTPS: Set it as FTPS if the FTP server is implicit SSL/TLS encrypted as a default over port 990.
  • Page 93: Http Server

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.18.3 HTTP Server The device also can send event message to the specified HTTP server. User can specify multiple HTTP servers as he wishes. Name Therefore, user needs to specify a name for each HTTP server setting.
  • Page 94: Samba Server

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.18.4 SAMBA Server The device also can send video stream to the specified SAMBA server. Most of the times, the SAMBA server will be another PC or NAS server.
  • Page 95: Event Schedule Configuration

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P 3.19 Event Schedule Configuration This menu is used to specify the schedule of Events and activate some actions provided by this device. 3.19.1 Setting Name Name of the Event or Schedule.
  • Page 96 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Select the triggered sources with event trigger. Trigger by Record File Define the prefix of recorded filename Prefix Action Define the actions once event is triggered. Example 1.
  • Page 97 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Example 2. Send file to e-mail server triggered by motion (from Friday 18:00 to Saturday 06:00): Select event trigger. Enable time: Start from Friday 18:00 and keep working for 12 hours, until it stops on Saturday 06:00.
  • Page 98: Record

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Example 3. Enable Voice Alert every 10 minutes during 18:00 to 24:00 from Monday to Friday. 1. Type: Select schedule trigger and interval is 10 minutes. 2. Enable Time: Select Monday to Friday, and set start time from 18:00 and keep working for 6 hours.
  • Page 99: Port Status

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Choose one of the profiles for recording. If the profile is H.265/H.264, the format of recorded file is avi. If the profile is Record File Type MJPEG, the format of recorded file is jpeg.
  • Page 100 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Input Status Show either inactive or active. Output Status Show either inactive or active.
  • Page 101: Appendix A: Ping Ip Address

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Appendix A: Ping IP Address The ping (or Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address, waiting for a reply. It’s also a very useful tool to confirm whether Internet camera is installed or not, or if the IP address conflicts with any other device over the network.
  • Page 102: Appendix B: Bandwidth And Video Size Estimation

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Appendix B: Bandwidth and Video Size Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements from your device.
  • Page 103: Appendix C: Ddns Application

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Appendix C: DDNS Application Configuring PLANET DDNS: Step 1: Visit DDNS provider’s web site and register an account if you do not have one yet. For example, register an account at http://planetddns.com...
  • Page 104: Appendix D: Configuring Port Forwarding Manually

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Appendix D: Configuring Port Forwarding Manually The device can be used with a router. If the device wants to be accessed from the WAN, its IP address needs to be set up as fixed IP address. Port forwarding or Virtual Server function of router also needs to be set up.
  • Page 105 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Your WAN IP address will be listed here. 3. Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet.
  • Page 106 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be accessed from WAN by the router’s WAN IP address.
  • Page 107: Appendix E: Power Line Frequency

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Appendix E: Power Line Frequency COUNTRY VOLTAGE FREQUENCY COMMENTS *Neutral and line wires are reversed from that Argentina 220V 50 Hz used in Australia and elsewhere. *Outlets typically controlled by adjacent switch.
  • Page 108 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Taiwan 110V 60 Hz Thailand 220V 50 Hz *Outlets typically controlled by adjacent switch. United Kingdom 230V* 50 Hz Though nominal voltage has been officially changed to 230V, 240V is within tolerances and commonly found.
  • Page 109: Appendix F: Troubleshooting & Frequently Asked Questions

    H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Appendix F: Troubleshooting & Frequently Asked Questions Features The device utilizes H.265, H.264 and M-JPEG compressions to provide high quality images. Where H.265 and H.264 is standard for The video and audio codec is video compression, M-JPEG is a standard for image compression.
  • Page 110 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P for the first time or after factory Note that it’s all case sensitive. default reset Follow the steps below. (1)Remove power, and press and hold the hardware reset button.
  • Page 111 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P Maybe NAT router does not support UPnP function. Please check Cannot work with NAT router user’s manual of router and turn on UPnP function. Maybe too many IP cameras have been installed on the LAN, and Some IP cameras are working while then NAT router is out of resource to support more cameras.
  • Page 112 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P manual for details.  Packet filtering of the router may prohibit access from an external network. Refer to your router's manual for details.  Access the Internet camera from the Internet with the global IP address of the router and port number of Internet camera.
  • Page 113 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P externally. firewall with your system or network administrator. The firewall may need to have some settings changed in order for the device to be accessible outside your LAN.
  • Page 114 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P  aCV5 for Android: https://play.google.com/store/apps/details?id=com.planet.acv5 What is the app for smart phone?  iCV5 for iOS: https://itunes.apple.com/us/app/icv5/id1022207789?mt=8  The RTSP command: rtsp://IP/media/media.amp?streamprofile=Profile1 What is the RTSP command? If user wants to play profile 2, please input “Profile2”.
  • Page 115 H.265 3 Mega-pixel IR IP Camera with Remote Focus and Zoom ICA-M4320P...

Table of Contents