Rtp; Network - Planet Networking & Communication ICA-E6265 User Manual

3.8.6 RTP

The RTP section allows user to configure RTP Settings.
If the RTSP Authentication is "Enabled", then the RTP streaming will require account name and
password authentication.
If the RTP B2 Frame is "Enabled", then the B2 frame is added to every video frame, containing an
additional information, such as motion detection status on each frame, digital input and digital
output levels, passive infrared status, other video intelligence data, frame counter, frame-rate
mode and the frame-rate, bitrate, resolution, timestamp and much more. The user side can
operate with video data easily, including event management, storage consumption estimation, image
resizing for preview, etc.
After changing any of the items above, press Apply to save the changes. The Reset button undoes
the changes that had just been made but not Applied yet.

3.8.7 Network

The Network section contains the controls for the following functions:
Type of Service

UPnP

Bonjour

ONVIF

2 Mega-pixel IR PoE Plus Speed Dome IP Camera
66
ICA-E6265