Planet Networking & Communication ICA-8200 User Manual

Planet Networking & Communication ICA-8200 User Manual

2 mega-pixel poe / wireless fish-eye ip camera

Advertisement

Quick Links

2 Mega-pixel PoE / Wireless
Fish-Eye IP Camera
ICA-8200 / ICA-W8200

Advertisement

Table of Contents
loading

Summary of Contents for Planet Networking & Communication ICA-8200

  • Page 1 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200 / ICA-W8200...
  • Page 2 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Copyright Copyright © 2014 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
  • Page 3 Do not dispose of WEEE as unsorted municipal waste; they should be collected separately. Revision User’s Manual of PLANET PoE / Wireless Fish-Eye IP Camera Model: ICA-8200 /ICA-W8200 Rev: 1.00 (September, 2014) Part No. EM-ICA-8200_W8200...
  • Page 4: Table Of Contents

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Table of Contents Chapter 1. Product Introduction ................6 1.1 Package Contents ...................6 1.2 Overview....................6 1.3 Features....................9 1.4 Product Specifications ................10 Chapter 2. Hardware Interface ................12 2.1 Physical Descriptions................12 2.2 Hardware Installation ................14 2.2.1 Wall/Ceiling Mounting Installation ..........
  • Page 5 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.9 Remote Storage..................57 Appendix A: Ping IP Address ................58 Appendix B: DDNS Application ................59 Appendix C: Configuring Port Forwarding Manually ..........60 Appendix D: Troubleshooting & Frequently Asked Questions......62...
  • Page 6: Chapter 1. Product Introduction

    Full Surveillance with 360º Surround View Furthermore, the ICA-8200 series is a fish-eye camera that allows you to monitor all angles of a location using just one camera and thus it saves lots of the traditional mechanical Pan/Tilt maintenance cost.
  • Page 7 Exceptional Image Quality Together with powerful image processing attributes like Wide Dynamic Range and Dimensional Noise Reduction technology, the ICA-8200 series is able to filter the intense backlight surrounding a subject and remove noises from video signal. Thus, the ICA-8200 series offers an extremely sharp and clear image quality even under any challenging lighting conditions.
  • Page 8 Users can have total control in determining the object and sensitivity of these motion detection windows. The ICA-8200 series is able to send email notifications, alerts and snapshots to any dedicated email account. This will alert the user of any event in real time, no matter where the recipient may be.
  • Page 9: Features

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 with ONVIF, the ICA-W8200 is therefore interoperable with the third brand camera in the market, which greatly supports users to integrate with their existing surveillance network. It also includes 64-CH central management software for ease of maintenance and remote monitoring.
  • Page 10: Product Specifications

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Network and Configuration Compliant with IEEE 802.3af PoE interface for flexible deployment (For ICA-8200) IEEE 802.11b/g/n wireless LAN with WEP and WPA encryptions (For ICA-W8200) Auto MDI/MDI-X supported UPnP® support for network setup and configuration...
  • Page 11 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 360° Triple view (1P2R) Triple with Source view (102R) Quad with Source view (103R) Audio 2-way audio Audio Streaming Audio Compression RTSP: G.711 64kbps Built-in microphone Microphone Built-in speaker Speaker Network and Configuration IEEE 802.3 10Base-T...
  • Page 12: Chapter 2. Hardware Interface

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Chapter 2. Hardware Interface 2.1 Physical Descriptions Dimensions (Φ x H) 194 x 49 mm Weight 324g (gross weight) Front Panel Interface Description It is for detecting the IP camera environment that illuminates.
  • Page 13 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Bottom Panel Interface Description The input power is 12V DC. Power Jack Connection to PC or Hub/Switch. It is connected to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-way protocol can...
  • Page 14: Hardware Installation

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 2.2 Hardware Installation 2.2.1 Wall/Ceiling Mounting Installation Step 1. Stick the given mounting label at the installation location. Step 2. Take the wall mount bracket, put it on the target place and fix it with the supplied screws (total of 2).
  • Page 15: Network Installation

    ICA-8200, when this switch is a PoE device, you can ignore the next step. As for the ICA-8200, if there is an IEEE 802.3af PoE switch in your network, you can connect the IP camera’s LAN cable to this PoE switch to obtain power.
  • Page 16 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 IPInstaller can search the cameras in the network that will help you to configure some basic setting before you start advanced management and monitoring. Step 1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once completed, a welcome menu screen will appear.
  • Page 17 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Step 4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder and then press “Next” to continue. Step 5. Please click “Next” to start the installation.
  • Page 18: Preparation

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Step 6. Please click “Close” to complete the installation and launch program immediately. 2.4 Preparation When you install the camera in a LAN environment, you may execute PLANET IPInstaller to discover camera’s IP address and set up related parameters in the camera.
  • Page 19: Opening The Web-Based Ui Of Select Camera

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Step 3. Double-click the item to open the Property Page or click the menu bar > Single Device Setting. Step 4. After filling out the desired settings in the properties, click on “Set” button to complete the configuration settings.
  • Page 20: Using Upnp Of Windows Xp Or 7

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 If you find your browser is opened and automatically connected to the camera Home Page, it means you’ve assigned an IP Address to the unit successfully. Now you can close the IP Installer and start to use your camera.
  • Page 21 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 The “Add or Remove Programs” will display on the screen and click Add/Remove Widows Components to continue. The following screen will appear, select “Networking Services” and click “Details” to continue. The “Networking Services” will display on the screen, select “Universal Plug and Play” and...
  • Page 22 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Please click “Next” to continue. The program will start installing the UPnP automatically. You will see the pop-up screen below. Please wait while setup configures the components.
  • Page 23 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Please click “Finish” to complete the UPnP installation Double-click “My Network Places” on the desktop, the “My Network Places” will display on the screen and double-click the UPnP icon with Internet camera to view your device in an Internet...
  • Page 24: Windows 7

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 2.5.2 Windows 7 Go to Start > Control Panel > Network and Internet > Network and Sharing Center, if network discovery is off; click the arrow button to expand the section.
  • Page 25: Internet Explorer 6 For Windows Xp

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 your PC. Your Internet Explorer security settings must allow for the web page to work correctly. To use the Internet camera, user must set up his IE browser as follows: 2.6.1 Internet Explorer 6 for Windows XP From your IE browser ”Tools”...
  • Page 26: Internet Explorer 7 For Windows Xp

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 2.6.2 Internet Explorer 7 for Windows XP From your IE browser ”Tools” ”Internet Options…” ”Security” ”Custom Level…”, please set up your “Settings” as follows: Set the first 3 items • Allow previously unused ActiveX control to run…...
  • Page 27 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 • Prompt “Initialize and script active controls not marked….” From your IE browser ”Tools” ”Internet Options…” ”Security” ”Trusted Sites” ”Custom Level…”, please set up your “Settings” as follows: • Enable “Automatic prompting for ActiveX controls”...
  • Page 28: Chapter 3. Web-Based Management

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Chapter 3. Web-based Managemen This chapter provides setup details of the Internet camera’s Web-based Interface. 3.1 Introduction The Internet camera can be configured with your Web browser. Before configuring, please make sure your PC is under the same IP segment with Internet camera.
  • Page 29 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Click on the message, and click Run Add-on When you see this message, click Run’ to install required ActiveX control After the ActiveX control is installed and run, the first image will be displayed.
  • Page 30: Live View

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.3 Live View Start-up screen will be as follows no matter you are an ordinary user or an administrator. Button Description Ceiling Mode With its fisheye lens (360º panoramic view), the Camera can offer the following live view display modes: 360°...
  • Page 31 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 180° Single broad view (1P wall) Source view (1O) 180° Triple view (1P2R) When the 1P2R PTZ display mode is selected, click the ePTZ function tool to display the PTZ setting tools.
  • Page 32 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 CH: Select the PTZ channel or display window (1 or 2) to implement PTZ setting. Step: Adjust and set the speed of live view panning motion. Directional Buttons: They are used to manually pan the scene to select and zoom a specific area (1 of 4 maximum) to be monitored.
  • Page 33: System Configuration

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.4 System Configuration Clicking the System button will display the following tabbed panes relative to system configurations. 3.4.1 Information Tab The information tabbed pane provides the existing system status of the camera which includes Model Name, System Time, Firmware Version, MAC Address, ActiveX Control Version, Wired Network, Wireless Network and DDNS Server Status.
  • Page 34: Time Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.4.2 Time Tab The Time tabbed pane is where you set up the clock of your Camera to synchronize with your local time. Where: The Network camera current date and time is applied and displayed...
  • Page 35: Security Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.4.3 Security Tab The Security tabbed pane allows you to add new camera User Name and change Password and the surveillance status or User Group. Click the ADD button to access the security setup dialog (shown below).
  • Page 36: Maintenance Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Password Enter the new password (see Note 4 of dialog for proper entry). Confirm Password Enter the password again for authentication (encoded display). Show Password Displays the decoded password when check box is enabled.
  • Page 37: System Log

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 The Maintenance tabbed pane allows you to upgrade the firmware with the latest version and to restore the Network camera settings to factory default. Download the latest firmware file from the website by executing the...
  • Page 38: General Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.5.1 General Tab The General tabbed pane (shown above) allows you to redefine the network and port protocol settings of the Network camera. This option obtains the available dynamic IP address...
  • Page 39 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 While PPPoE protocol is selected, you may have to enter some more information such as the above picture. While camera IP is changed dynamically because of PPPoE Network connection, its new IP Address will be sent to “Sender E-mail Address”...
  • Page 40: Wireless Tab (Ica-W8200 Only)

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.5.2 Wireless Tab (ICA-W8200 only) The Wireless tabbed pane provides search and display of available wireless networks from which you can select the most suitable one for your camera. Status Wireless...
  • Page 41: Ddns Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.5.3 DDNS Tab The DDNS tabbed pane allows you to configure the Dynamic Domain Name System of your network device with a host name instead of the IP Address. DDNS Enable Enable the check box to support DDNS function.
  • Page 42: Multicast Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.5.4 Multicast Tab Multicast is a bandwidth conservation technology. This function allows several users to share the same packet sent from IP camera. To use Multicast, appoint IP Address and port here. TTL means the life time of packet. The larger the value is, the more users can receive the packet.
  • Page 43: Video And Audio Setup Execution

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.6 Video and Audio Setup Execution Clicking the Video & Audio button will display the following tabbed panes for defining camera streaming, video, and audio functions. 3.6.1 Stream Tab...
  • Page 44 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 The Stream tabbed pane (see the above figure) provides the adjustments for the video quality of the camera streaming function. The pane offers the following three modes of video quality setting: Connection Template Four option modes are available: “Fast,”...
  • Page 45: Video Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Larger value means longer distance between two I-Frames and this selection is suitable for the stable Network Bandwidth Environment; so we suggest the smaller value selection is proper to the worse Network Bandwidth Environment.
  • Page 46 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 The Video tabbed pane lets you perform live adjustments and improvement of the camera captured video effect relative to the target environment. If you experience difficulty in implementing the adjusted parameters, it is recommended that you use the default setting by pressing the Reset button (see figure below) at the back of the camera.
  • Page 47: Audio Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Camera Mount 3 kinds of format to choose from: Wall, Ceiling and Hi-FPS. 3.6.3 Audio Tab The Audio tabbed pane provides the following audio adjustments to your camera microphone and speaker: Mute Enable or disable mute function of the camera microphone.
  • Page 48: Privacy Mask Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Connect a loud speaker to the Audio-Out port of camera. This is for voice alerting and two-way audio. Be noted to use an active speaker (normally with power supplier on speaker) for this application.
  • Page 49: Event Setup Execution

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Step 3. To permanently disable the Privacy Mask function, disable the Enable Privacy Mask check box. 3.7 Event Setup Execution Clicking the Event button will display the tabbed panes (see figure below) for defining event recording of the Camera.
  • Page 50: Video Tab

    Motion, and GPIO, each of which can be set up with user scheduled recording time and duration, as well as defining the video record file target destination. Only the ICA-8200/W8200 enables Motion/PIR to trigger video recording and bind into CloudLync Cloud Service with Google account. The recorded video files in the SD memory card will be uploaded and backed up to your Google Drive synchronously.
  • Page 51 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 in the SD card as selected. ■ Trigger by Schedule This method activates the camera video surveillance/recording Schedule operation continuously when the defined days of the week and set time of the set days are met. Motion is ignored with this method.
  • Page 52: Snapshot Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 ■ Trigger by GPIO GPIO On the defined days of the week and at certain time of the set days, the Camera will trigger its GPIO Input Signal when its state changes.
  • Page 53 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 ■ Trigger by Schedule This method activates the camera snapshot operation continuously Schedule when the defined days of the week and set time of the set days are met. The camera will continuously capture 6 snapshots of the area under surveillance at every 1 or 2 seconds at intervals.
  • Page 54 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 ■ Trigger by GPIO GPIO On the defined days of the week and at certain time of the set days, the Camera will trigger its GPIO Input Signal according to the set time interval (in seconds) when its state changes.
  • Page 55: Local Storage Setup Execution

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 ■ Trigger to E-mail, FTP, SD card The stream of accumulated snapshots may be sent to host through e-mail or FTP, or stored in the SD card per selection or through all 3 available methods. When selected, the setup dialog for these methods will display as illustrated in the following figure.
  • Page 56: Local Storage Tab

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 3.8.1 Local Storage Tab Save Click this button to save changes to the SD card control setting. Format Click this button to format the SD memory card (take note of the message in red).
  • Page 57: Remote Storage

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Playback of the stored videos or snapshots is performed from files recorded on particular date range as explained in the following figure. 3.9 Remote Storage The device also can send motion stream to specified SAMBA and NFS server. Most of the time,...
  • Page 58: Appendix A: Ping Ip Address

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Appendix A: Ping IP Address The Ping (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm the installation of Internet camera, or if the IP address conflicts with any other device over the network.
  • Page 59: Appendix B: Ddns Application

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Appendix B: DDNS Application Configure PLANET DDNS with the following steps: Step 1. Enable DDNS option through accessing Web page of NAS Step 2. Select on DDNS server provided, and register an account if you have not used yet.
  • Page 60: Appendix C: Configuring Port Forwarding Manually

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Appendix C: Configuring Port Forwarding Manually The device can be used with a router. I f the device wants to be accessed from the WAN, its IP address needs to be set up as fixed IP address. The port forwarding or Virtual Server function of router also needs to be set up.
  • Page 61 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet. The router connects to the Internet over a series of numbered ports.
  • Page 62: Appendix D: Troubleshooting & Frequently Asked Questions

    2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Appendix D: Troubleshooting & Frequently Asked Q uestions Features The video and audio codec is The device utilizes H.264 and M-JPEG triple compression to provide adopted in the device. high quality images. Where H.264 is standard for video compression, M-JPEG is standard for image compression.
  • Page 63 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 detect device over a router. If IP address is not assigned to the PC which is running IPInstaller program, then the program cannot find device. Make sure that IP address is assigned to the PC properly.
  • Page 64 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Packet Filtering of the router may prohibit access from an external network. Refer to your router's manual for details. Access the network camera from the Internet with the global IP address of the router and port number of network camera.
  • Page 65 2 Mega-pixel PoE / Wireless Fish-Eye IP Camera ICA-8200/ICA-W8200 Video quality of the device The focus on the camera is bad. The lens is dirty with dust accumulated. Fingerprints, dust, stain, etc. on the lens can degrade the image quality.
  • Page 66 PoE Fish-Eye IP Camera / *Type of Product pixel 5 Mega-pixel PoE Fish-Eye IP Camera *Model Number: ICA-8200 / ICA-8500 * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
  • Page 67 For the following equipment: 2 Mega-Pixel Wireless Fish-Eye IP Camera / *Type of Product: : Wireless 5 Mega-Pixel Fish-Eye IP Camera *Model Number: : ICA-W8200 / ICA-W8500 * Produced by: Manufacturer’s Name : Planet Technology Corp. Manufacturer’s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,. Taiwan (R.O.C.) is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility...
  • Page 68 EC Declaration of Conformity English Hereby, PLANET Technology Corporation, Lietuviškai Šiuo PLANET Technology Corporation,, skelbia, declares that this Product Wi-Fi is in compliance kad Product Wi-Fi tenkina visus svarbiausius with the essential requirements and other relevant 1999/5/EC direktyvos reikalavimus ir kitas svarbias provisions of Directive 1999/5/EC.

This manual is also suitable for:

Ica-w8200

Table of Contents