Chapter 2. Hardware Interface
2.1 Physical Descriptions
2.1.1 Identification of ICA-E3550V connectors
1. Memory Card Slot: Supports microSDHC and microSDXC cards.
Insert a memory card (not included) into this slot for local recording purposes.
2. Reset Button: Uses the Reset Button to reset the camera to its factory default settings. To do the
reset, press and hold the Reset button for at least 5 seconds or until the Power LED lights up. When
the Power LED lights up again, reset is complete.
3. Power LED
The Power LED lights up when the camera is connected to the power source and goes off once the
camera boot-up process is complete.
.
4. Ethernet Port
Connect to a network using a standard Ethernet cable.
5 Mega-pixel Bullet IR PoE IP Camera
13
ICA-E3550V
4
5
6
7