Touring Control - Planet Networking & Communication ICA-E6265 User Manual

3.4.2 Touring Control

Once a preset point is created, the Touring Control page tab appears. Click the Touring Control page
tab to configure the Preset Tour. A Preset Tour directs the camera to cycle through a sequence of
preset points and stay on each preset point for a specific time.
To set or modify a tour, do the following:
(1) On Select a Preset Point, select a tour and then click Edit Tour.
(2) Select a preset point from the list, set the duration (sec) of how long the camera will stay in that
point and the pan/tilt speed (the bigger the number, the faster the speed), and then click
(3) On the Preset Points, the preset points added to the Tour are listed.
To change the sequence of preset points, click the
To directly go to the preset point, click
To delete the preset point from the list, click
2 Mega-pixel IR PoE Plus Speed Dome IP Camera
(first/up/down/last) icons.
.
.
48
ICA-E6265
.