Https - Planet Networking & Communication ICA-E6265 User Manual

Parameters
Streaming Server Port
RTSP Server Port
Multicast Setting allows users to configure the IP addresses and ports for multicast video and audio
(supported models only) streams. Multicast is a protocol where a data stream is sent only once and
shared to requesting devices. This in turn saves network bandwidth. However, to use this feature,
network devices, such as routers and switches, should support IP multicast.
Parameters
Stream 1
Stream 2
Stream 3
Audio
By Request
Multicast IP
Network Port
Multicast TTL
After changing any of the items above, press Apply to save the changes. The Reset button undoes
the changes that had just been made but not Applied yet. New port settings will only take effect after
pressing System -> Save & Reboot.

3.8.3 HTTPS

HTTPS protocol allows creating a secure channel over an insecure network in order to protect the data
sent between the camera and its counterpart. Two things are required to have a s ecure
communication – encrypted data, and verified counterpart of the communication. To make sure that
the messages are being sent and received from true counterpart, the certificate is needed.
2 Mega-pixel IR PoE Plus Speed Dome IP Camera
programs (e.g., NVR).
Select the port used by this IP device for Video Streaming (TCP).
Select the port assigned for RTSP protocol access.
Refers to the video stream 1.
Refers to the video stream 2.
Refers to the video stream 3.
Refers to the audio stream.
Appears only if the camera model supports audio
input/output.
When checked, the video or audio stream will be streamed only to a
particular receiver when that receiver sends a request or in the case of
the Network Video Recorder (NVR), select to view or record the stream. If
unchecked, the video or audio stream will constantly be streamed to the
network whether there are devices viewing the video or not. To save on
network bandwidth, it is recommended to check this function.
Set the multicast IP of the corresponding stream.
Enter the assigned port for the corresponding stream.
Enter the multicast TTL (time-to-live) of the corresponding stream. This
value determines the time span (in seconds) when the packet is retained
in the network. When the time expires and no request is received, the
packet is then discarded.
61
Description
Description
ICA-E6265