Table of Contents
Advertisement
(4) Repeat steps 2 and 3 to add more preset points to the tour.
(5) Once done, click the Save button on Select a Preset Point.
(6) On Touring Control, select the tour name to activate. Once activated, the camera will start the
tour.
Ensure Auto Tracking is disabled to use Touring Control.
3.4.3 Scan Control
The Scan Control page enables the camera to go from one predefined point to another by scanning the
view horizontally without losing focus. Unlike in preset tours, wherein the camera goes to one preset
point to another quickly and focusing only on the present point area, scan function goes over point 1 to
point 2 on a steady pace with the whole viewing angle in complete focus. The scan speed can also be
configured according to user preference.
Click the Scan Control page tab to configure scan function.
To set or modify scan points, do the following:
(1)
On Scan Points, click
(2)
Pan and tilt on the area that you want to set as scan point 1.
2 Mega-pixel IR PoE Plus Speed Dome IP Camera
of scan point 1 to set the scan starting point.
49
ICA-E6265
Advertisement
Table of Contents
