Appendix D. Configuring Port Forwarding Manually - Planet Networking & Communication ICA-E6265 User Manual

Appendix D. Configuring Port Forwarding
The device can be used with a router. If the device wants to be accessed from the WAN, its IP address
needs to be set up as a fixed IP address. The port forwarding or Virtual Server function of router also
needs to be set up. This device supports UPnP traversal function. Therefore, user could use this
feature to configure port forwarding of NAT router first. However, if user needs to configure port
forwarding manually, please follow the steps below:
Manually installing the device with a router on your network is an easy 3–step procedure as follows:
1. Assign a local/fixed IP address to your device
2. Access the Router with Your Web browser
3. Open/Configure Virtual Server Ports of Your Router
1. Assign a local/fixed IP address to your device
The device must be assigned a local and fixed IP Address that allows it to be recognized by the router.
Manually setup the device with a fixed IP address, for example, 192.168.0.100.
2. Access the Router with Your Web browser
The following steps generally apply to any router that you have on your network. PLANET wireless AP
is used as an example to clarify the configuration process. Configure the initial settings of the router by
following the steps outlined in the router's Quick Installation Guide.
2 Mega-pixel IR PoE Plus Speed Dome IP Camera
Manually
125
ICA-E6265