Table of Contents
Advertisement
Operation
1
Normal Operation
Power On
When the power is applied to RFK505, the "RED LED" is turned on.
Registered Card Reading
When a registered card (or PIN) is read, the door (Relay1) will open for 3 seconds (Def
aults) with the "GREEN LED" on.
Alarms by Temper Switch
After RFK505 is installed on the wall, if someone take the RFK505 off from the wall th
en "YELLOW LED" is on and buzzer is activated continuously.
2
Default Setting
When you operate the RFK505 first time or you initialize the RFK505, the controller will setu
p all values to defaults (Factory Settings). You can change the settings for desired applicatio
n. Please refer to the "APPENDIX" section at the back of this manual for the default setting v
alues.
11
p.30
Advertisement
Table of Contents
