4.1
Reader Connections (External Reader)
Proximity Reader Connection
Connect (+) wire of the RFK505 to +12V (Red wire).
●
Connect (-) wire of the RFK505 to GND (Black wire).
●
Connect DATA0 wire of the RFK505 to DATA0 (Pink wire).
●
Connect DATA1 wire of the RFK505 to DATA1 (Cyan wire).
●
If the controller and the external reader use separate power sources, you must con
nect the GND between the controller and the external reader.
Compatible Readers(External Reader)
RFK505/IPK505:
Standard 26BIT Wiegand Format Proximity Readers
●
Standard 26BIT Wiegand + 8BIT Burst Format Proximity and Keypad Reader
●
RF-TINY, RF10, RF20, RF30, RF70, RF500, RFK101
●
FGR006, FGR006EX, iP10, iP20, IP30, iPK101
●
SRK505
Standard 34BIT Wiegand Format Proximity Reader
●
Standard 34BIT Wiegand + 8BIT Burst Format Proximity and Keypad Reader
●
SR10, SR20, SR30, SRK101, FGR006SR, FGR006SRB
●
p.22
Installation