System Initialization - IDTECK Star RFK505 User Manual

Before mounting the main unit to the Wall Mount bracket, operational test of the
unit should be completed, as the locking pins will lock the unit to the Wall Mount.
Removing the unit from the Wall Mount bracket after they have been installed tog
ether may cause damages to the bracket and render its effectiveness.
3. Insert 5 O-rings to the wall mount as indicated, then route the cable of the main unit th
rough the center hole and push the main unit to wall mount to lock the main unit and t
hen make sure that the main unit is locked with wall mount.
2

System Initialization

You have to initialize the Star RFK505 prior to installation.
After power is supplied to the Star RFK505, press the Initialization Switch on the back of the
RFK505 unit and then keep it for more than 2 second. Then you can see the display below. I
f you want initialization, press key <1>, otherwise press key <0>. Follow steps below.
Press the key <1> if you want initialization.
1
Initialization is processing
2
p.20 Installation