Keypad Interface (Keypad Connector); Saving Data On The Memory Card - gefran SIEIDrive ADV100 Quick Start Up Manual

7.7 Keypad interface (keypad connector)

Several devices can be connected to the multifunction keypad connector (9-pin D-SUB receptacle connector XS1) and
are automatically recognised and managed.
Optional KB-ADV100 keypad (default connection)
- The keypad is supplied with a 40 cm-long cable, for longer distances, a 1:1 non-crossover cable must be used (9
shielded cables, e.g. code 8S8F59, length 5 m).
- Very long cables (max. 15 m) must be of good quality with low voltage loss (max. 0.3 ohm/m).
The connections have no galvanic isolation!
Caution

7.8 Saving data on the Memory Card

With the ADV120-C drive, data can be saved on a normal Secure Digital-type memory card. In order to use the
memory card, the specific adapter (SD-ADL) must be connected by inserting it into the dedicated slot on the front of the
drive. For further information, see chapter 8.9.
44
SIEIDrive ADV100
SD Card
WARNING:
Risk of Electric Shock.
Capacitive voltages above 50V may
remain for 5 minutes after power is
disconnected.
AVERTISSEMENT:
Risque de décharge électrique.
Des tensions supérieures à 50V
peuvent subsister aux bornes des
condensateurs durant 5 minutes
après la coupure de l'alimentation.
Connectors
Keypad PC
SIEIDrive
SD Card
WARNING:
ADV100 • Quick installation guide - Specifications and connection
EN
Alarm
I Lim
Run
CAN Run
CAN Error
1 5
6 9
Keypad connector (XS1)
CAN
ADV100
SD Card
EN
Alarm
I Lim
Run
CAN Run
CAN Error