Table of Contents
Advertisement
CAUTION
Starting the M8070A Software
Keysight M8040A High-Performance BERT Getting Started Guide
The enclosure surface of the module may become hot during use. If you
need to remove the module, first power down the AXIe chassis, allow the
module to cool, and then pull the module out of the chassis.
For preventing damage, for usage tips, and for ESD information, read
NOTE
and follow the instructions in the "Tips for Preventing Damage Guide"
(Document Part No. #M8000-91010).
1
Ensure that the system is powered up and ready to start as described
in the sections
2
On the host computer, click on Start > All Programs > Keysight
M8070A > Keysight M8070A.
3
When the Load Settings screen appears as shown in
page -57, load the last used, factor preset, or new settings.
Figure 19
4
The screen shown in
Using the M8040A High-Performance BERT
Basic Setup for M8040A
Load Settings screen
Figure 20
on page -58 should now be displayed.
on page
31.
Figure 19
3
on
57
Advertisement
Table of Contents
