Table of Contents
Advertisement
3
Using the M8040A High-Performance BERT
Locating Electronic Manuals and Online Help
Routine Care
CAUTION
CAUTION
56
Various electronic manuals and the M8070A Online Help provide
information on how to configure and use the supported instrument
modules.
On installing the M8070A software, you will find documentation by clicking
Start > All Programs > Keysight M8070A > Keysight M8070A
Documentation.
You can also visit
versions of various manuals and the data sheet for each M8040A module.
Except for performing initial chassis verification or troubleshooting, do
NOTE
not operate the chassis with empty slots. Always insert a filler panel in
empty slots. This is especially important for the slots on either side of an
installed instrument module. This allows proper air flow and cooling, and
provides EMI shielding for the chassis and installed components. Leaving
slots empty can increase fan speed, raise ambient noise, overheat
components, and can cause the module to shut down.
Do not block the vent holes on the chassis. This overheats and damages
their components. Leave a gap of at least 2" (50 mm) around all vent
holes.
Some instruments, such as M8057A, have an internal fan to keep the
components cooled to normal operating temperatures. Make sure that
there is enough clearance for adequate air-flow.
www.keysight.com/find/m8040a
Keysight M8040A High-Performance BERT Getting Started Guide
to find the latest
Advertisement
Table of Contents
