M8045A Front Panel Input/Output Ports
CAUTION
Keysight M8040A High-Performance BERT Getting Started Guide
Connector Name
Clk Mod In
Sys Out A/Sys Out B
Sys In A/Sys In B
The inputs of the M8045A module are sensitive to static electricity.
Therefore, take necessary anti-static precautions, such as wearing a
grounded wrist strap, to minimize the possibility of electrostatic damage.
Table 5
M8045A Front Panel Input/Output Ports
Component
CLK Out1
CLK Out2
P and N
REMOTE HEAD 1, 2
DATA MOD IN 1, 2
Active when...
input is active
output is active
logic state is detected
Description
•
Low Jitter (~150fs) Clk out. Baud-rate / 1,2,4,8,16
•
Same Jitter as Data out or clean clk
•
Typ 1.5 V pp
•
Low Jitter (~150fs) Clk out. Baud-rate / 1,2,4,8,16
•
Same Jitter as Data out or clean clk
•
Typ 1.5 V pp
P and N must be connected to M8057A remote head.
Remote Head Control. This output provides power and control signals for the
remote head amplifier
This input is used for data out delay modulation by an external source.
Introduction
1
Color
green
green
green
23