Table of Contents
Advertisement
1
Introduction
M8046A Front Panel Inputs/Outputs Ports
CAUTION
26
As displayed in
following components.
Table 6
Insertion/Extraction and Retaining
Component
Retaining screws
Module Insertion/Extraction
Handles
Table 7
Front Panel LEDs
Connector Name
Fail
Access
Clk In x
Ctrl Out x
Ctrl In x
Data In
The inputs of the M8046A module are sensitive to static electricity.
Therefore, take necessary anti-static precautions, such as wearing a
grounded wrist strap, to minimize the possibility of electrostatic damage.
Figure 6
on page -25, the M8046A module has the
Description
The screws on both ends of the module are used to retain the module tightly
inside the M9505A AXIe Chassis slot once you have fully placed it inside the
chassis. To remove the module, you first need to loosen these screws ensuring
that these screws disengage completely.
The handles on both sides of the module to insert or eject the module from the
slot of the M9505A AXIe Chassis.
Active when...
power-up fault condition
power-up ready state
on when output active and CLK detected
on when output active
logic state is detected
data received
Keysight M8040A High-Performance BERT Getting Started Guide
Color
red
green
green
green
green
green
Advertisement
Table of Contents
