1
Introduction
M8057A Pattern Generator Remote Head
M8057A Remote Head Components
28
The M8057A remote head is an external box which must be connected to
each channel of M8045A module. The three cables are fixed on the back
side of M8057A which need to be connected to M8045A remote head, P
and N connectors. It helps in minimizing signal degradations caused by
lossy channels.
Please note that it is mandatory to connect M8057A remote head with
NOTE
each channel of M8045A module. Operation without M8057A remote
head will not allow you to receive data.
The following figure displays the front panel of the M8057A remote head
with its various components:
Figure 7
As displayed in
following components.
Table 9
Connector Name
Ready
M8057A remote head front panel
Figure 7
on page -28, the M8057A remote head has the
Front Panel LEDs
Active when...
remote head is operation
Keysight M8040A High-Performance BERT Getting Started Guide
Color
green