Alternative Main Display Details - Functions And Use; Main Input / Output Display - Functions And Use; Main Trend Display - Functions And Use - Ametek OXYvisor Installation, Operation & Maintenance Manual

Installation, Operation & Maintenance Manual
OXYvisor Optical Oxygen Analyzer

5.7 Alternative Main Display Details - Functions and Use

Oxy 20.948 %O2
1
Sample 5 sec
2
Temp
67.9°F
3
850.9 mBar
Pres
4

5.8 Main Input / Output Display - Functions and Use

1. Analog Out 1
1
2. Analog Out 2
2
3. Analog In
3
4. Relay Out 1
4
5. Relay Out2

5.9 Main Trend Display - Functions and Use

1 4
↕
20.948 % O
O2 & Temp
2
2
˗
100% O
2
˗
˗
˗
˗
˗
Alternate Main Display
Phase 29.34°
28,716
Amp
Error
0
10:55 AM
Time
Input/Output Display
17.49 mA (Oxy)
0.0mA (N.A)
12.21mA (Temp)
Open (Cal)
Open (Cal)
5
67.9°F 3h 50m 21s
212°F
6
Oxygen measurement value
1
Sample Rate - The current user selected
2
Sample Rate. This programmable rate
determines how often the measurement is taken.
5
3 Temperature- Measured and Compensated
6
4 Pressure - Measured and Compensated
7
5 Phase Angle - Measured Phase Angle
8
Amplitude - Indicates Signal Strength
6
7 Error - Will show any error value.
8 Time - via the 24 Hour Clock
1 Analog Out 1 - Indicates the AO1 mA output for
the related PV. This example shows, 17.49 mA for
Oxygen.
Analog Out 2 - Indicates the AO2 mA output for
2
the related PV. This example shows, 0.0 mA for
N.A. (Not applicable) for a channel not set up.
3
Analog In - Shows the measured mA input from the
Temperature or Pressure transmitter.
4
Relay Out 1 - Show Status of the Relay as Open/
Closed. This example shows an Open (cal) which
indicates relay is not active, and is dedicated to
AutoCal.
1 PV's vs time - Using the up and down arrows you
can select a combination of different PV's vs time to
be graphed. Example show O
PV1 Scale - This shows the PV, value and unit
2
3
˗
for the left Y axis of plot (solid line).
˗
3
PV2 Scale - This shows the PV, value and unit for
˗
the right Y axis of plot (dashed line).
˗
4
Measured Values of PV1 and PV2 - Shows the current
˗
measured values of the selected parameters.
˗
5 Plot Time - Amount of time shown on graph
PV's vs Time - The solid line is PV1 (left Y axis)
6
and dashed is PV2 (right Y axis)
Section 5
Operations
and Temp
2
47