Main Display - Functions And Use; Figure 28 - Main Display (Four Viewing Options) And Sub-Menu Options - Ametek OXYvisor Installation, Operation & Maintenance Manual

Section 5
Operations
Oxygen 01/06/2017 10:55 AM
% O2 
850.9 mBar
20.946
67.9°F
Err: 0


Figure 28 - Main Display (Four Viewing Options) and Sub-Menu Options

5.6 Main Display - Functions and Use

1
2
Oxygen
% O2 
20.946
46
Installation, Operation and Maintenance Manual
MAIN DISPLAY (FOUR VIEWING OPTIONS)
Alternate Main Display
Oxy 20.948 %O2 Phase
Sample 5 sec Amp
Temp 67.9°F Error
Pres 850.9 mBar Time
Measurement
& Units
Diag-Test
Security
SUB-MENU OPTIONS
3
01/06/2017 10:55 AM
850.9 mBar
67.9°F
5
Err: 0
6

OXYvisor Optical Oxygen Analyzer
Input/Output Display
1. Analog Out 1
29.34°
2. Analog Out 2
28,716
3. Analog In
0
4. Relay Out 1
10:55 AM
5. Relay Out2
ESC ◄ TO ENTER SUB-MENUS
Calibration Input Output
Datalogging
Help Error
Codes

1
Oxygen measurement value
The Oxygen Units can be temporarily changed
2
via the and
does not affect the 4-20 output. The units will
reset to the selected parameter upon exiting the
4
screen.
3 Date MM/DD/YYYY and 12 hr clock (am/pm)
4 Pressure - Measured and Compensated
5 Temperature - Measured and Compensated
Error Code - Will show any error value. If multiple
6
errors exists it will sequentially show each of them.
"0" is no errors.
↕
20.948 % O
O2 & Temp
˗
17.49 mA (Oxy) 100% O
2
˗
0.0mA (N.A)
˗
12.21mA (Temp)
˗
Open (Cal)
˗
˗
Open (Cal)
arrows for convenience. This
67.9°F 3h 50m 21s
2
212°F ˗
˗
˗
˗
˗
˗