Oxyvisor - Pipe-Mount To Vertical Pipe; Oxyvisor - Pipe-Mount To Horizontal Pipe; Figure 8 - Oxyvisor Vertical Pipe Mount Examples; Figure 9 - Oxyvisor Horizontal Pipe Mount Example - Ametek OXYvisor Installation, Operation & Maintenance Manual

Installation, Operation & Maintenance Manual
OXYvisor Optical Oxygen Analyzer

4.5.2 OXYvisor - Pipe-Mount to Vertical Pipe

1. Locate the proper height for the HMI and display so that it is easily accessible for user
2. Install the L-bracket to the analyzer by tightening down the (4) M6 slotted screws.
3. Install the U-bolt around the pipe at the proper height into the L-bracket and tighten the M8 nuts
4. Double check tightness of the screws and bolts
VERTICAL PIPE MOUNT - TOP VIEW
Back
Front

Figure 8 - OXYvisor Vertical Pipe Mount Examples

4.5.3 OXYvisor - Pipe-Mount to Horizontal Pipe

1. Locate the proper height for the HMI and display so that it is easily accessible for user
2. Install the L-bracket to the analyzer by tightening down the (4) M6 slotted screws.
3. Install the U-bolt around the pipe at the proper height into the L-bracket and tighten the M8 nuts
4. Double check tightness of the screws and bolts
Horizontal Pipe Install - TOP VIEW
Back
Front

Figure 9 - OXYvisor Horizontal Pipe Mount Example

316 SS Pipe
Mount Bracket
(4) 3/4" NPT or M25x
1.5 6H Conduit Ports
(4) 316 SS M6
Slotted Screws
316 SS L-Bracket
(2) 316 SS
M8 Nut
1-1/2" to
2-1/4" pipe
or similar
316 SS
U-Bolt
1-1/2" to
2-1/4" pipe
orsimilar
Vertical Pipe Install - FRONT VIEW
OXYvisor
 
ESC


Horizontal Pipe Install - FRONT VIEW
(4) 3/4" NPT
or M25x1.5
6H Conduit
Ports
OXYvisor
 
ESC
 
316 SS L-Bracket
Section 4
Installation
1-1/2" to
2-1/4" pipe
orsimilar
1-1/2" to
2-1/4" pipe
316 SS
or similar
U-Bolt
(2) M8 Nuts
(4) M6 Slotted Screws
316 SS Pipe
Mount Bracket
27