Date And Time; Type Of Network - ABB M4M 20 User Manual

M4M 20 NETWORK ANALYZER USER MANUAL

7.3.Date and time

Setting date and time is mandatory in order to use the time-related functionalities on the device (e.g. Maximum,
Minimum). Please notice that if no date and time are set, no timestamp will be available on the measured data.
→ → →
Unit
Menu Description
Set date Configure the current date with format YYYY/MM/DD.
Set time Configure the current time.
When M4M 20 is turned off, the date and time are reset. After turning on the M4M 20 network analyzer, please
configure date and time.

7.4.Type of network

In order to configure the type of network it is needed to choose one of the available options according to
the installation conditions.
MID compliant networks are market with M on the display.
→ →
Installation
3Ph/4W/3CT
3Ph/3W/3CT
3Ph/3W/2CT
3Ph/3W/1CT
2
According to the type of network that has been chosen, the parameters visualized on the device HMI
change. Please see below the table with details:
Option Description
3Ph/4W/3CT 3-phase 4-wire + 3CTs
3Ph/4W/1CT 3-phase 4-wire + 1CT
3Ph/3W/1CT 3-phase 3-wire + 1CT
3Ph/3W/3CT 3-phase 3-wire + 3CTs
Date/Time
Date/Time
Set Date
Set Time
→
Type of network
1. Use
2. Press
Option
3Ph/3W/2CT
2Ph/3W/2CT
1Ph/2W/1CT
to scroll the list on of values or
fields.
ENTER to confirm or
modification.
1
Description
3-phase 3-wire + 2CTs
2-phase 3-wire + 2CTs
1-phase 2-wire + 1CT
31
BACK to cancel the