Technical Specifications - Strong SRT 2402 User Manual

Problem
The receiver switches off after
3 hours of no commands of the
remote control
Forgotten your PIN code
The external USB HDD does not
start.
Timeshift intermittent playback
A recording does not start

9.0 TECHNICAL SPECIFICATIONS

Tuner & Demodulator
Frequency range DVB-S2:
Frequency range DVB-T2 :
Frequency range DVB-C:
Demodulator modes:
Demodulator DVB-S2:
Demodulator DVB-T2:
Demodulator DVB-C:
Video decoder
Video compression:
Video resolution:
Audio decoder
Audio support:
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
System & Memory
Android Version:
Chipset:
CPU:
GPU:
SDRAM:
Flash:
Connectors
ANT IN/CABLE IN IEC-169 Female
SAT IN F-type
S/PDIF (coax.)
Possible reason
The power saving Auto standby
function is activated
Default PIN is 1234
The power consumption is too
high.
Too many USB devices
connected
HDD is not selected in the menu Select the recording device in
950~2150 MHz
174 MHz ~ 230 MHz/474 MHz ~ 858 MHz
113 MHz ~ 858 MHz
DVB-T2, DVB-S2, DVB-C
QPSK/8PSK; Symbol rate up to 55 Mbps
QAM modes: 4, 16, 64, 256 (with or without rotation)
Bandwidths: 1.7, 5.0, 6.0, 7.0, 8.0 MHz
FFT Sizes: 1K, 2K, 4K, 8K, 16K, 32K±600 KHz frequency
16QAM, 32QAM, 64QAM, 128QAM, and 256QAM; Symbol
rate up to 7.0 Mbps
H.264/AV, H.265/HEVC
4K@60fps 1080p/1080i, 720p
MEPG, OGG, OGA, FLAC, ALAC, Ape, M4A, RM, MPEG-1
layer1/2 (Dolby® Digital, Dolby® Digital Plus*, WMA, WMA
Pro, WMV optional)
7.1
Amlogic S905D-B
Quad Core Cortex-A53 2.0 GHz
Mali-450MP
DDR3, 1 GB
eMMC: 8 GB
Remedy
Switch off the Auto Standby/
Daydream function.
Contact your local Service
Hotline or send an email to our
support via www.strong.tv
Connect an extra power supply
adapter to your USB HDD device.
Disconnect e.g. the USB camera
the DVR settings menu.
23