Equipment Set-Up; Accessories - Strong SRT 2402 User Manual

It is a necessity that you only use an approved extension and compatible wiring that is suitable
„ „
for the electrical power consumption of the installed equipment. Please ensure that the
electrical power supply corresponds with the voltage on the electrical identification plate at the
back of the device.
Operating Environment
Do not install this equipment in a confined space such as a bookcase or similar unit.
„ „
Do not use the set near damp, and cold areas, protect the set from overheating.
„ „
Keep away from direct sunlight.
„ „
Do not use the set near dust place.
„ „
Do not place candles near the opening area, to avoid flammable foreign material from entering
„ „
the device.
WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe recycling.
Storage
Your device has been carefully checked and packed before shipping. When unpacking it, make sure that
all the parts are included and keep the packaging away from children. We recommend that you keep
the carton during the warranty period, to keep your device perfectly protected in the event of repair or
warranty.

1.2 Equipment Set-up

We recommend you to consult a professional installer to set up your antenna equipment. Otherwise,
please follow the instructions below:
Use a high quality, well shielded coaxial cable to receive antenna signals in highest levels
„ „
Use a high quality, well shielded HDMI cable to watch also in highest screen resolutions.
„ „
Refer to the user manual of your TV and antenna how to connect the cables.
„ „
This user manual provides complete instructions for installing and using the receiver. The symbols will
serve as follows:
WARNING:
Tips
Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver.
(Bold characters)
Move to Represents a menu item within a window.
(Italic characters)

1.3 Accessories

Installation Instructions
„ „
Troubleshooting
„ „
Safety instructions/warranty cards
„ „
4
Indicates warning information.