First Installation; First Installation Of Android; First Installation Of Dtv - Strong SRT 2402 User Manual

4.0 FIRST INSTALLATION

This procedure will enable you to enjoy and set up your Android receiver in just a few steps. It is
recommended to follow the First Installation step by step. It will guide you through the basic installation
and channel searching process.

4.1 First installation of Android

Step 1: Language
Step 2: Resolution
Step 3: Screen Adjust
Step 4: Network
Step 5: Date&Time:
Step 6: Final step:

4.2 First Installation of DTV

This menu allows you to install your Free-To–Air TV and radio channels from one of the three tuners.
Step 1: Define DTV scan options
Aspect Ratio:
Zap Mode:
Subtitle Mode:
LCN:
Tuner Type:
Select your preferred language for the on-screen menu. Use t u to
change language and press OK to confirm your selection.
Select the screen resolution you prefer. Default selection is
Automatic, which already shows the best setting of the connected
screen. Press OK to confirm your selection. A banner appears to
confirm the new setting by selecting OK. Confirm again with OK. If
you do not see this banner immediately, wait a couple of seconds
and the screen will return to its previous state. Then try another
resolution.
Use pq to adjust the size of the screen so it exactly fits the screen
you are using. Press OK to confirm.
If you have already connected the Ethernet cable to your router,
in most cases the unit finds the correct settings automatically and
jumps directly to Step 5. If you haven't connected a Ethernet cable,
but prefer using Wi-Fi, select Wi-Fi and press OK to open the menu
with the available Wi-Fi networks. Use pq to select your network
and enter the key or password. The 0 ~ 9 buttons on the remote
control can also be used for entering.
If you have successfully connected to the Internet in Step 4, this
screen will automatically show the date and your local time. If
necessary, you can select an item to modify it manually.
Select Scan TV channel if you would like to proceed directly to install
Digital TV from satellite, terrestrial or cable signals. Select Login in to
Google to set up a Google account. Select Go to Home page to skip
the steps above and go directly to the Android main page.
Select Full for the official size or Auto to adjust the size with your
screen.
Choose Black Screen to get a black screen when zapping through the
channels. Select Hold Screen to hold the last watched screen when
zapping through the channels.
Select Off, Normal or Hard of Hearing to define how you would like to
display subtitles.
Select On if you would like to use LCN modes in DVB-T.
Select which tuners you would like to use: Satellite and Terrestrial or
Satellite and Cable
9