Recording Functions; Installation - Strong SRT 2402 User Manual

Insert a USB HDD into one of the free USB slots. Alternatively, you can use USB sticks but it must be high
speed and high capacity for recording of HD content.
Storage
Recording Duration
Timeshift
Auto Timeshift
7.3.7 System
This menu allows you to see the currently used software version of the DTV part and restore back to the
factory defaults.
Run on Start-up
Factory Reset
WARNING:

7.4 Recording functions

The receiver supports instant recording, recording via timer and recordings booked via the Electronic
Programme Guide (EPG). First select the storage device on which you like to store the recordings before
you can use the recording functions. Connect the storage device and select DVR settings in the DTV
settings menu. After you have made recordings you can watch them by selecting the option DVR from
the DTV menu.
Press OK to open this menu. Select the recording you want to watch. At the right side of this menu you
can see the date and size of the recording. Press OK to start playback and use the multimedia buttons
for forwards, backwards, pause and stop. Press the RED Delete button to remove the selected recording
from the list.

7.5 Installation

In this menu you can select Satellite or DVB-T/Cable search and save the corresponding settings for the
channel search.
Select the USB device you like to use for the recording function.
The recording time is set to 3 hours as default. For changing this time, select
your default recording time. When you start a recording by pressing 4 you
change this default time to another. The next recording will show this default
time.
Default Timeshift time is set to No limitation. This means that during Timeshift
the data keeps writing to the USB device until you press 3. For limiting the
size of data to prevent that the whole space on your connected USB device is
used you can select your maximum write time.
Select On to start Timeshift automatically right after channel switch. If you
switch to other channels, Timeshift will be available by the time you re-switch.
Select Off to deactivate this function.
Select On for starting the DTV immediately after you power ON the box with
main power. Select Off to start in the Android mode.
This function resets your DTV receiver settings back to the default factory
settings. Press OK and enter the PIN code to continue. Select OK to confirm
executing the factory reset. This option will delete all your channels, favourite
lists and settings from the DTV. The receiver will reboot and start with the First
Installation menu of the DTV part.
A factory reset will permanently delete all your personal settings, timers and
stored channels. The Android part is kept as it is. Please consider this before
you perform a factory reset.
19