Front And Rear Panel Symbols - Agilent Technologies PSA Series Getting Started Manual

Front and Rear Panel Symbols

This symbol is used to indicate power ON (green LED).
This symbol is used to indicate power STANDBY mode (yellow
LED).
This symbol is used to indicate the ON position of the power
button.
This symbol is used to indicate the OFF position of the power
button.
This symbol indicates the input power required is AC.
The instruction documentation symbol. The product is marked
with this symbol when it is necessary for the user to refer to
instructions in the documentation.
The CE mark is a registered trademark of the European
Community. This product complies with all relevant directives.
The C-Tick mark is a registered trademark of the
Australian/New Zealand Spectrum Management Agency. This
product complies with all relevant EMC regulations.
This is a marking of an Industrial Scientific and Medical Group
1 Class A product, and to indicate product compliance with the
Canadian Interference-Causing Equipment Standard
(ICES-001).
The CSA mark is a registered trademark of CSA International.
This product complies with all relevant safety requirements.
This product complies with the WEEE Directive (2002/96/EC)
marking requirements. The affixed label indicates that you must
not discard this electrical/ electronic product in domestic
household waste.
Product Category: With reference to the equipment types in the
WEEE Directive Annex I, this product is classed as a
"Monitoring and Control instrumentation" product.
Do not dispose in domestic household waste.
To return unwanted products, contact your local Agilent
office, or see
for more information.
Chapter 2
Front and Rear Panel Features
Front and Rear Panel Symbols
http://www.agilent.com/environment/product/
33