GROOVE CONTROL function
For the Swing or Groove Bend function, your own Groove can be
created by altering the trigger timing in real-time.
Using SWING
Swing delays the trigger timing and creates various grooves.
1 Turn the [SWING] knob to set the Swing value.
The value before change and the value after change are shown on the display.
• The value can be set in percentage from [0] % to [100] %.
(1) Value before the change, (2) Value after the change
• If the setting value is changed from [0] % to [100] %, the trigger timing of the
even step will be delayed. When it is set to [0] %, there is no Swing effect.
When it is set to [100] %, the trigger timing is offset to the position of 1/32T.
Phrase arrangement section
92
En