[CLOCK] setting
You can change the settings of the following terminals.
The default setting is shown with *.
OUT Sync Mode
Setting value: 1ppqn, 2ppqn, 4ppqn, 24ppqn*, 48ppqn
Set the timing clock rate from the [CLOCK OUT] terminal.
Check the specification of the connected equipment and select an
appropriate value.
• 1ppqn:
Timing clock rate of 1ppqn (Pulse Per Quarter Note)
Outputs 1 pulse at the timing of one beat (one quarter note).
• 2ppqn:
Timing clock rate of 2ppqn (Pulse Per Quarter Note)
Outputs 1 pulse at the timing of 1/2 beat (Eighth note).
• 4ppqn:
Timing clock rate of 4ppqn (Pulse Per Quarter Note)
Outputs 1 pulse at the timing of 1/4 beat (16 minute note).
• 24ppqn:
Timing clock rate of 24ppqn (Pulse Per Quarter Note)
24 pulse timing clock is the length of one quarter note.
• 48ppqn:
Timing clock rate of 48ppqn (Pulse Per Quarter Note)
48 pulse timing clock is the length of one quarter note.
Changing the settings
128
En