PIONEER DJ Toraiz Squid Operating Instructions Manual page 76

Initializing a step
1 Press the [TRIGGER] button, or hold down the [SHIFT] button and
press the [TRIGGER] button.
The 16-pads switches to Trigger mode or CC mode.
2 Hold down the [COPY] and [PASTE] buttons and press the pad of
the step you want to initialize.
The step is initialized and the pad lights dimly.
• In Trigger mode, various parameters are initialized as follows.
PITCH value:
GATE value:
VELOCITY value: 100
COUNT value:
DIVIDE value:
Trigger:
Tie:
CV Slide:
Active:
Harmonizer:
• In CC mode, various parameters are initialized as follows.
CC1 control value: 0
CC2 control value: 0
CC3 control value: 0
CC4 control value: 0
CC5 control value: 0
CC:
Active:
Note number 60
1.000 step
1
1
Mute
Disabled
Disabled
Active
Disabled
Mute
Active
76
En
Step edit section