PIONEER DJ Toraiz Squid Operating Instructions Manual page 63

3 Press the rotary selector.
The highlight on the display moves to the controller number.
(1) Controller number
4 Turn the rotary selector to select the controller number.
• Pressing the rotary selector toggles the highlight between assigning to the
knob and setting the controller number.
5 Press the 16-pads to switch the output of the control value.
• Pressing the same pad toggles the output of the control value on (lit) and off
(lit dimly).
6 Hold down the pad to set control value on and turn the [PITCH/
CC1], [GATE/CC2], [VELOCITY/CC3], [COUNT/CC4], or
[DIVIDE/CC5] knobs that corresponds to the controller number that
you want to set.
• The controller number and the control value are shown on the display.
(1) Controller number, (2) Control value
Step edit section
63
En