PIONEER DJ Toraiz Squid Operating Instructions Manual page 53

 Setting one note information (Monophonic note) to one pad
1 Hold down the pad to set the note information and turn the [PITCH/
CC1], [GATE/CC2], or [VELOCITY/CC3] knob, or press the []/
[] button.
The note information will be shown on the display and you can set the
corresponding parameters as follows.
• [PITCH/CC1] knob:
• [GATE/CC2] knob:
• [VELOCITY/CC3] knob: VELOCITY value
• []/[] button:
Notes
• While holding down multiple pads and performing the operations above, you
can change the parameters of all the pads that are held down at the same
time.
• While not holding down any pad and performing the operations above, you
can change the parameters of all the pads in the current pattern at the same
time.
 Setting multiple note information (Polyphonic note) to one pad
1 Hold down the pad to set the note information and turn the rotary
selector.
The note information will be shown on the display. You can switch the
corresponding note in the order of [Note], [Note1], [Note2], and so on to
[Note8] by turning the rotary selector to show the note to set.
PITCH value
GATE value
OFFSET value
53
En
Step edit section