[Etc] setting
The default setting is shown with *.
Middle C
Setting value: C3, C4*, C5
Set a pitch name to assign to note number 60.
Auto Power Off
Setting value: Disable, Enable*
Set Auto Power Off to Disable/Enable.
• For details about Auto Power Off, see "Auto power off function"
(page 7).
Step Preview
Setting Value: Disable, Enable, Ena(Mute Cur Tr), Ena(Mute All Tr),
Ena(Stop/Pause)
Set MIDI message output of the note information of the pads held down
by Trigger mode or Interpolation.
• Disable:
• Enable:
• Ena(Mute Cur Tr): MIDI messages are output; however, at the same
• Ena(Mute All Tr): MIDI messages are output; however, at the same
• Ena(Stop/Pause): MIDI messages are output only when a sequence
Changing the settings
MIDI messages are not output.
MIDI messages are output.
time the output of the current track is muted.
time the output of all tracks are muted.
is stopped or paused.
138
En