PIONEER DJ Toraiz Squid Operating Instructions Manual page 167

Connecting to external equipment
Notes
• When using a 5 PIN DIN conversion cable, use a conversion cable
that is a 1 PIN-RING, 3 PIN-TIP connection instead of a MIDI
conversion cable. The stereo mini-jack 5 PIN DIN conversion cable
for MIDI cannot be used for SYNC conversion because PIN 1 and
PIN 3 are not connected.
• When triggering the [CLOCK IN] terminal with an audio signal
without using the Start/Stop signal, use a monaural mini-jack to
prevent noise in the Start/Stop signal input pin.
• When using the audio signal as a trigger signal, input an appropriate
volume of signals containing keen attack/decay, such as pulse
signals or click sound.
• Input audio signals at the level of 2 V or more.
• When setting [IN Sync Mode] of the [CLOCK] setting in the
GLOBAL menu to [Gate] to Gate control the unit with the [CLOCK
IN] terminal, input the Gate signal of V-Trigger into the [CLOCK IN]
terminal.
Also, sequence playback/stop cannot be controlled by inputting the
Start/Stop signals to the [CLOCK IN] terminal.
Set [Sync Source] of the [Sync Common] setting to an other than
[CLOCK]. If it is set to [CLOCK], the sequence playback will never
be performed even though the GATE signal is input.
167
En