PIONEER DJ Toraiz Squid Operating Instructions Manual page 122

[GATE] setting
You can change the settings of the following terminals.
The default setting is shown with *.
 GATE1 Mode
Setting value: S-Trigger, V-Trigger 5V*, V-Trigger 10V
Set the output method of the [GATE OUT1] terminal.
• S-Trigger:
Short circuit trigger or negative trigger method
The output will be one of the open (open), or short (short-circuit).
Usable in applications such as connecting the foot pedal
• V-Trigger 5V:
Voltage trigger or positive trigger method
The output voltage will be 5 V or 0 V.
• V-Trigger 10V:
Voltage trigger or positive trigger method
The output voltage will be 10 V to 12 V or 0 V.
Changing the settings
122
En