Tie Mode - PIONEER DJ Toraiz Squid Operating Instructions Manual

Notes
• When you turn the knob that corresponds to the controller number
that you want to set, the controller number is switched instantly.
• While holding down multiple pads and performing the operations
above, you can change the control values of all the pads that are held
down at the same time.

TIE mode

You can set the tie of each step (pad), connecting the sound of the
previous step (pad).
Setting TIE to a step
1 Press the [TRIGGER] button.
The button lights up in orange and the 16-pads switches to Trigger mode.
2 Hold down the [TIE] button and press the pad of the step to set Tie
to.
The [TIE] button lights up in orange. Hold down the 16-pads to enter Tie mode.
The pad of the step where Tie is on lights up in purple.
• Pressing the same pad toggles the Tie on and off.
3 Release the [TIE] button.
The 16-pads returns to Trigger mode.
Note
When 2 or more DIVIDE value are set on the step prior to the step
where Tie is set, Tie is applied to the last note that is divided.
Step edit section
64
En