SHAPE setting
1 Turn the [SHAPE] knob to select a waveform to be used for the
modulation.
The waveform name before the change and the waveform name after the
change are shown on the display.
(1) Waveform before the change, (2) Waveform after the change
• If you do not turn the knob for a period of time, the display returns to the
former state.
• The waveform can be selected from the following.
(1) Triangle1
(3) Sine
(5) Saw
Phrase arrangement section
Time Line
Time Line
Time Line
82
En
(2) Triangle2
(4) Cosine
(6) Square
Time Line
Time Line
Time Line