Changing the settings
[CV/GATE OUT] setting
You can set the source terminal and channel for MIDI to CV/GATE
conversion.
The default setting is shown with *.
CV/GATE1 From
Setting value: Disable*, MIDI Ch.1 to MIDI Ch.16, USB Ch.1 to USB
Ch.16
Set the input terminal and input channel of MIDI signals output to the
[CV OUT1] terminal and [GATE OUT1] terminal after CV/GATE
conversion.
CV/GATE2 From
Setting value: Disable*, MIDI Ch.1 to MIDI Ch.16, USB Ch.1 to USB
Ch.16
Set the input terminal and input channel of MIDI signals output to the
[CV OUT2] terminal and [GATE OUT2] terminal after CV/GATE
conversion.
118
En